Are you planning to build a new warehouse or production facility? Do you want to get a strong, warm and durable building in a short time? Then polystyrene concrete wall panels are exactly what you need. This material allows you to optimize construction costs and reduce the time of construction of the facility.
Building the future is today! Modern technologies allow you to create buildings that are not only strong, but also energy-efficient and environmentally friendly. One of such breakthrough materials is polystyrene concrete. This material opens up new opportunities for the construction of warehouses and industrial facilities.
Polystyrene concrete is a construction designer of the 21st century. With its help, you can assemble any building, like with LEGO, quickly, easily and reliably. This material is not only durable and warm, but also allows you to implement the most daring architectural solutions.
What is polystyrene concrete?
Polystyrene concrete is a lightweight concrete created on the basis of cement, water, special additives and expanded polystyrene granules. Its unique structure provides high heat and sound insulation, low weight and ease of installation. Due to this, polystyrene concrete is widely used in the construction of wall panels, ceilings and other structural elements.
Advantages of polystyrene concrete
1. Energy efficiency
Wall panels made of polystyrene concrete have a thermal conductivity coefficient 5-7 times lower than that of traditional bricks. This allows you to reduce the cost of heating and air conditioning of buildings by up to 50%. For example, in winter, the temperature inside the warehouse remains stable even with minimal heating costs.
2. Strength and durability
Despite its lightness, polystyrene concrete has high strength. It is resistant to mechanical loads, cracks and deformations. This characteristic makes it an ideal choice for warehouses, logistics centers and industrial buildings.
3. Construction speed
Polystyrene concrete panels are easily transported and installed, which reduces construction time by 30-40% compared to traditional materials. Thanks to this, large industrial facilities can be quickly erected without loss of quality.
4. Environmental friendliness
The material is manufactured with minimal use of natural resources and does not emit toxic substances. This contributes to the preservation of the environment and the creation of a comfortable microclimate inside the building.
5. Economical efficiency
Due to the low cost of production and installation, the use of polystyrene concrete allows you to reduce total construction costs by up to 20%. For example, building a 1000 m² warehouse will cost 15-25% less than using traditional materials.
Comparison of brick construction and polystyrene concrete products
Comparison of the construction of Aerated Concrete and polystyrene products tone
Comparison table
< td style="padding: 10px; border: 1px solid #DDD;">From 500 to 600 kg/m³
< td style="padding: 10px; border: 1px solid #DDD;">Environmental friendliness
Polystyrene concrete D500
Foam concrete D700
(non-autoclaved)
Aerated concrete D500
(autoclaved)
Compressive strength
В2.0 - В2.5
DSTU B V.2.7- 214:2009
В1.5 - В2.5
DSTU B V.2.7-214:2009
В1,0 - В2,5
DSTU B V.2.7-214:2009
Bending tensile strength
Not less than 0.7 MPa
DSTU B V.2.7 -214:2009
Not standardized
(does not pass tests)
Not standardized
(does not pass tests)
Density
From 400 to 600 kg/m³
From 600 to 800 kg/m³
Thermal conductivity
0.08-0.12 W/(m·K)
0.14-0.21 W/(m·K)
0.12-0 ,14 W/(m·K)
Water absorption
Up to 5%
Up to 18%
Up to 25%
Frost resistance
50-75 cycles
15-25 cycles
25-50 cycles
High
Medium
Average
Durability
100+ years 40-50 years
60-80 years
Comparison table
|
Polystyrene concrete D500
|
Foam concrete D700
(non-autoclaved) |
Aerated concrete D500 (autoclaved) |
|
|---|---|---|---|
| Compressive strength | В2.0 - В2.5 DSTU B V.2.7- 214:2009 |
В1.5 - В2.5 DSTU B V.2.7-214:2009 |
В1,0 - В2,5 DSTU B V.2.7-214:2009 |
| Bending tensile strength | Not less than 0.7 MPa DSTU B V.2.7 -214:2009 |
Not standardized (does not pass tests) |
Not standardized (does not pass tests) |
| Density | From 400 to 600 kg/m³ | From 600 to 800 kg/m³ | |
| Thermal conductivity | 0.08-0.12 W/(m·K) | 0.14-0.21 W/(m·K) | 0.12-0 ,14 W/(m·K) |
| Water absorption | Up to 5% | Up to 18% | Up to 25% |
| Frost resistance | 50-75 cycles | 15-25 cycles | 25-50 cycles |
| High | Medium | Average | |
| Durability | 100+ years | 40-50 years | 60-80 years |
Polystyrene concrete is a modern building material that opens up new opportunities in the construction of warehouses and industrial buildings. Its advantages, such as energy efficiency, strength, environmental friendliness and cost-effectiveness, make it indispensable in modern construction. The company “TATOBUD” is ready to offer you high-quality polystyrene concrete wall panels for the implementation of your projects. Contact us today for a consultation and to learn more about the benefits of this material
Write a comment